Image of Factory Links OEM Series® Rear Wheel Bearing Kit.

Exploded view of Factory Links OEM Series Rear Wheel Bearing Kit on a hub with bearings, spacers, and seals installed.

Cutaway view of Factory Links OEM Series front wheel bearing showing internal ball elements and seal design.

Factory Links wheel ball bearing with off-road specific seal and precision-ground race.

A black box packaging for Factory-Links with red and silver text, and an image of the bearing components.

OEM Series® Rear Wheel Bearing Kit – Husqvarna, Sherco, SWM | RWK-Q-011

$47.00

Quantity

Factory Links OEM Series® Rear Wheel Bearing Kits are engineered to handle the higher torque loads, sustained radial stress, and heat exposure experienced at the rear hub of off-road, enduro, dual-sport, and motocross motorcycles.

Exploded view of front wheel hub with bearing kit components

Designed to meet or exceed OEM specifications, each kit includes premium deep groove ball bearings and Nitrile Butadiene Rubber (NBR) double-lip oil seals—manufactured to strict dimensional tolerances to ensure proper axle alignment, drivetrain stability, and smooth rear wheel rotation under power.

Unlike generic aftermarket replacements, Factory Links rear wheel bearings are packed with a heavy-duty marine-grade grease and specialized thickener blend formulated to resist grease breakdown under high load, chain tension, and elevated operating temperatures.

Rear wheel bearings endure continuous drive torque from the chain and sprocket assembly—placing greater demand on load capacity and seal integrity than front wheel applications. Our bearings are engineered specifically to withstand these forces while maintaining smooth rotation and long service intervals.

Every kit includes all components required for a complete rear wheel hub rebuild—including bearings, oil seals, and model-specific spacers (where applicable)—to eliminate wheel play, restore drivetrain precision, and extend service life in mud, water, sand, and extreme off-road environments.

For exact compatibility, refer to the Fitment tab or use our Year/Make/Model search tool.

Off-road certified icon Best value guarantee icon Built for extreme conditions icon

Technical Details

HEAVY-DUTY BALL BEARINGS

Factory Links OEM Series rear wheel bearings are manufactured to DINP6 – ABEC3 standards and developed specifically for high-load motorcycle rear hub applications.

Precision-ground races for smooth and consistent rotation under torque
Optimized internal clearances to accommodate sustained radial load
High-grade bearing steel for long-term durability
Designed to handle chain tension, acceleration forces, and sprocket-side stress

Rear wheel bearings operate under continuous drivetrain load—our internal tolerances are engineered accordingly to prevent premature wear and overheating.

OFF-ROAD SPECIFIC OIL SEALS

Each kit includes premium NBR double-lip oil seals designed to:

Prevent intrusion of water, mud, sand, and debris
Retain grease under sustained rotational load
Resist contamination from chain lubricant and road grime
Maintain sealing integrity under elevated temperatures

These seals are purpose-built for off-road motorcycles—not industrial substitutes.

MARINE-GRADE HIGH-LOAD GREASE FILL

Marine-grade grease fill used in Factory Links wheel bearings

All Factory Links OEM Series rear wheel bearings are pre-packed with a high-performance marine grease featuring:

Enhanced moisture resistance
Superior rust and corrosion protection
Improved shear stability under high torque
Extended lubrication intervals

This increased grease durability helps reduce premature failure caused by heat buildup, frequent washdowns, and harsh off-road riding conditions.

FAQs

Q: How do I know if my rear wheel bearings are worn?
A: Common signs include lateral wheel play at the axle, grinding noise under acceleration, rough rotation when spinning the wheel, excessive sprocket movement, or visible contamination during inspection.

Q: Does this kit include seals and spacers?
A: Yes. All OEM Series Rear Wheel Bearing Kits include bearings and oil seals required for complete service. Many applications also include model-specific spacers where required.

Q: Why are rear wheel bearings different from front bearings?
A: Rear wheel bearings must withstand continuous drive torque from the chain and sprocket assembly, higher sustained loads, and increased heat exposure—requiring optimized internal clearances and enhanced grease durability.

Q: Is this kit suitable for motocross, enduro, and dual-sport use?
A: Yes. These kits are designed specifically for high-load off-road applications where drivetrain stability, contamination resistance, and durability are critical.

Q: Do I need special tools for installation?
A: Proper installation typically requires a bearing driver or press tool to avoid damaging the hub or applying force through the rolling elements. Install bearings squarely, verify spacer alignment, and ensure correct seal orientation for optimal performance.

Fitment

Kit / Fitment	Wheel Bearing kit
Manufacturer	HUSQVARNA
Model	CR 125 (2000-2013) REAR CR 250 (2000-2004) REAR SM 400 R (2005-2007) REAR SM 450 R (2005-2007) REAR SM 450 RR (2008-2009) REAR SM 510 R (2005-2007) REAR SM 530 RR (2009-2009) REAR SM 610 (2006-2008) REAR SMR 450 (2008-2010) REAR SMR 510 (2008-2010) REAR SMS 630 (2010-2011) REAR TC 250 (2004-2013) REAR TC 450 (2004-2013) REAR TC 510 (2004-2009) REAR TE 250 (2004-2012) REAR TE 310 (2009-2013) REAR TE 450 (2004-2013) REAR TE 510 (2004-2013) REAR TE 511 (2012-2013) REAR TE 610 (2004-2009) REAR TE 630 (2010-2011) REAR TXC 250 (2009-2012) REAR TXC 310 (2012-2013) REAR TXC 450 (2009-2013) REAR TXC 510 (2009-2013) REAR TXC 511 (2012-2013) REAR WR 125 (2000-2013) REAR WR 250 (2000-2013) REAR WR 300 (2008-2010) REAR
Manufacturer	SHERCO
Model	125 SE FACTORY (2020-2023) REAR 125 SE-R SIX DAYS (2018-2018) REAR 125 SE-R+ (2018-2018) REAR 2.5 FACTORY (2010-2010) REAR 2.5 I (2011-2013) REAR 2.5 I ENDURO (2008-2013) REAR 2.5 I F-R (2011-2011) REAR 2.5 I R (2012-2013) REAR 2.5 I-F (2013-2013) REAR 250 I ENDURO (2009-2009) REAR 250 SE (2014-2016) REAR 250 SE FACTORY (2023-2023) REAR 250 SE SIX DAYS (2015-2018) REAR 250 SEF (2014-2016) REAR 250 SEF FACTORY (2019-2023) REAR 250 SEF RACING (2014-2016) REAR 250 SEF RACING (2021-2021) REAR 250 SEF SIX DAYS (2015-2018) REAR 250 SEF-R (2017-2018) REAR 250 SEF-R FACTORY (2019-2019) REAR 250 SEF-R RACING (2020-2020) REAR 250 SE-R (2017-2018) REAR 250 SE-R RACING (2019-2022) REAR 250 SE-R+ (2018-2018) REAR 300 SE FACTORY (2023-2023) REAR 300 SEF FACTORY (2023-2023) REAR 300 SEF-R (2014-2022) REAR 300 SEF-R FACTORY (2014-2022) REAR 300 SEF-R SIX DAYS (2016-2022) REAR 300 SE-R (2014-2022) REAR 300 SE-R FACTORY (2014-2022) REAR 300 SE-R SIX DAYS (2015-2022) REAR 450 SEF FACTORY (2023-2023) REAR 450 SEF-R (2014-2022) REAR 450 SEF-R FACTORY (2016-2022) REAR 450 SEF-R SIX DAYS (2016-2022) REAR 500 SCF (2019-2020) REAR 500 SEF FACTORY (2022-2023) REAR 500 SEF RACING (2021-2021) REAR 500 SEF-R RACING (2019-2021) REAR ENDURO 4.5 I (2004-2008) REAR ENDURO 4.5 I FACTORY (2007-2008) REAR SE 250 IF (2010-2010) REAR SE 250 IF-R (2010-2010) REAR SE 3.0 I-F RACING (2010-2013) REAR SE 300 I-F (2010-2013) REAR SE 4.5 I-F (2009-2013) REAR SE 4.5 I-FR (2010-2011) REAR SE 450 I-R (2012-2013) REAR SE 5.1 I-F (2007-2011) REAR SE 5.1 I-FR (2010-2011) REAR SE-R 125 (2018-2019) REAR SM 4.5 I (2004-2008) REAR SM 5.1 I (2007-2008) REAR
Manufacturer	SWM
Model	RS 300 R (2015-2026) REAR RS 500 R (2015-2026) REAR SM 500 R (2015-2026) REAR

Collection

Filters

OEM Series® Rear Wheel Bearing Kits

OEM Series® Rear Wheel Bearing Kit – Husqvarna, Sherco, SWM | RWK-Q-011

Customer Services

Support

Shop

Follow us

Subscribe